Products

GRS-6000A Series

The GRS-6000A Series is a Real-Time/Digital Storage Oscilloscope, which provides both analog and digital storage features in one product. As original signals correctly represent and quickly update, the GRS-6000A Series allows users simultaneously to savie the waveform. With Equivalent Time Sampling at 500MSa/s, the GRS-6000A Series are capable of reconstructing repetitive waveforms up to 50MHz/30MHz in an accurate and detailed fashion. The waveform storage could be done just by pressing the RUN-STOP button, or through the Single Trigger mode which captures single-shot events. 10 Reference Waveforms can be saved and recalled for waveforms comparison. Numerous functions, such as Average, Pre-Trigger, Roll mode, Peak Detect, Envelop, Persistence, and X-Y mode, are available to meet various measurement applications. The RS-232C Interface and the free Remote Control Software enable monitoring, remote controlling, and storing waveforms in PC.

 

Features

  • 50M/30MHz with 100MSa/s and 2 Channles
  • Equivalent Time Sampling of 500MSa/s max.
  • Acquire Mode : Peak Detect, Envelop, Persistence
  • Pre-Trigger Function 0 ~ 10 div
  • ROLL Mode to 100s/div
  • Waveform SAVE/RECALL 10 sets (REF0~REF9)
  • Max. Sweep Rate 10ns/div
  • Panel Setting SAVE/RECALL 10 sets (M0~M9)
  • RS-232C Interface
  GRS-6052A GRS-6032A
CRT
Type and Acceleration 6-inch CRT, 10kV 6-inch CRT, 2kV
Illumination Front panel control
Z-axis Input Sensitivity : at least 5V
Polarity : positive going input decreases intensity
Max. input voltage:30V(DC+ACpeak)
Input Impedance : approx. 33kΩ Input Impedance : approx. 47kΩ
VERTICAL SYSTEM
Deflection Coefficient and Accuracy 1mV ~ 2mV/div ±5%,
5mV ~ 20V/div ±3%,
14 steps in 1-2-5 sequence
Variable Continuity 2.5 : 1 ~ min. 50V/div
Bandwidth (-3dB) 1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~50MHz
1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~30MHz
Vertical Mode CH1, CH2, DUAL (ALT or CHOP)
Chopper Frequency Approx. 250kHz
Sum or Difference CH1+CH2, CH1-CH2
Invert CH2
Input Impedance 1MΩ ±2%//approx. 25pF
Input Coupling AC, DC, GND
Input Voltage Max. 400V(DC+ACpeak)
HORIZONTAL SYSTEM
Sweep Time 0.2μs/div ~ 0.5s/div, 20 steps
Variable Continuity 2.5 : 1 up to 1.25s/div (uncal.)
Accuracy ±3%, ±5% at x5/ x10MAG. ±8% at x 20MAG
Sweep Magnification x5, x10, x20
Max. Sweep Time 20ns/div (10ns/div uncal) 50ns/div (10ns~40ns/div uncal)
ALT-MAG Function Yes
HOLD-OFF Time Variable
TRIGGER
Trigger Mode AUTO, NORM, TV
Trigger Source VERT, CH1, CH2, LINE, EXT
Trigger Coupling AC, HFR, LFR
Trigger Slope  "+"or" - "polarity
ALT Trigger Yes
Indicator Trigger LED Yes
TV Sync. Separator TV-V"-", TV-H" - "
Trigger Sensitivity
GRS-6052A 20Hz~5MHz 5MHz~40MHz 40Hz~50MHz
GRS-6032A 20Hz~2MHz 2MHz~20MHz 20Hz~30MHz
CH1, CH2 0.5div 1.5div 2.0div
Vert-Mode 2.0div 3.0div 3.5div
EXT 200mV 800mV 1V

TV sync. pulse more than 1 div or 200mV (EXT)
External Trigger Input Input impedance :Approx. 1MΩ//25pF (AC coupling)
Max. input voltage : 400V (DC + ACpeak)
X-Y OPERATION
Input X-axis : CH1 ; Y-axis : CH2
Sensitivity 1mV/div ~ 20V/div
Bandwidth X-axis : DC ~ 500kHz (-3dB)
X-Y Phase Shift <3° from DC ~ 50kHz
DIGITAL STORAGE
Acquisition Digitizer 8 bit ADC x 2
Max. Sampling Rate 500MSa/s for equivalent time sampling
100MSa/s for normal sampling
Storage Bandwidth Single shot: DC ~ 25MHz
Repetitive: DC ~50MHz
Single shot: DC ~ 25MHz
Repetitive: DC ~30MHz
Dynamic Range ±5div
Memory Length- Acquisition Memory  2k words/CH x 2, 1k words/CH(equivalent)
Memory Length- Save REF Memory 1k words/CH x 10 with back-up memory (REF0~REF9)
Memory Length- Display Memory 1k words/CH x 4 waveform(max.)
Sweep Time Equivalent: 0.2μs/div ~ 0.5μs/div
Normal Sample: 1μs/div ~ 0.1s/div
Roll: 0.2s/div ~ 100s/div
Sweep Magnification x 5, x 10, x 20
Max.Sweep Time 10ns/div
MAG Interpolation DOTS, LINEAR
ALT-MAG Function Yes
Acquire Mode Sample, peak detect(>25ns), Envelop. Persist, Average(2~256)
Operation Mode Auto, Norm, Single, Single-roll, Roll, X-Y, Run/Stop
Smoothing Function Dot joint ON/OFF selectable
Pre-Trigger Pre-trigger 0 ~10div in 0.02div steps
X-Y Operation X-axis: CH1 Y-axis: CH2
Storage Bandwidth DC~50MHz(-3dB)
Display Resolution H: 100points/div; V: 25points/div;
X-Y: 25 x 25 points/div
SAVE/ RECALL
Panel Setting 10 sets(M0 ~M9)
Waveform 10 sets(REF0~REF9)
READOUT & CURSOR
Cursor Measurement ΔV, ΔT, 1/ ΔT
Readout Intensity Adjustable
OUTPUT SIGNAL
CH1 Signal Output Voltage : approx. 20mV/div (with 50Ω terminated)
Bandwidth : 50Hz ~ 5MHz
Calibrator Output Voltage : 0.5V±3%
Frequency : approx. 1kHz, square wave
INTERFACE
  RS-232C
POWER SOURCE 
  AC 100V/120V/230V±10%, 50/60Hz
DIMENSIONS & WEIGHT
  275(W) x 130(H) x 370(D) mm; Approx. 8.5kg
Display: List / Grid
Show:
Sort By:
Features 50M/30MHz with 100MSa/s and 2 Channles Equivalent Time Sampling of 500MSa/s max. Acquire Mode : Peak Detect, Envelop, Persistence Pre-Trigger Function 0 ~ 10 div ROLL Mode to 100s/div Waveform SAVE/RECALL 10 sets (REF0~REF9) Max. Sweep Rate 10ns/div Panel Setting SAVE/RECALL 10 sets (M0~M9) RS-232C Interface ..
Rs 0.00 Ex Tax: Rs 0.00
Features 50M/30MHz with 100MSa/s and 2 Channles Equivalent Time Sampling of 500MSa/s max. Acquire Mode : Peak Detect, Envelop, Persistence Pre-Trigger Function 0 ~ 10 div ROLL Mode to 100s/div Waveform SAVE/RECALL 10 sets (REF0~REF9) Max. Sweep Rate 10ns/div Panel Setting SAVE/RECALL 10 sets (M0~M9) RS-232C Interface ..
Rs 0.00 Ex Tax: Rs 0.00